InfoPrint Color 1826 Скачать руководство пользователя

Страница: 191 / 238

Troubleshooting

Solving basic printer problems

If there are basic printer problems, or the printer is unresponsive, make sure:

•

The power cord is plugged into the printer and a properly grounded electrical outlet.

•

The electrical outlet is not turned off by any switch or breaker.

•

The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords.

•

Other electronic equipment plugged into the outlet is working.

•

The printer is turned on. Check the printer power switch.

•

The printer cable is securely attached to the printer and the host computer, print server, option, or other network

device.

•

All options are properly installed.

•

The printer driver settings are correct.

Once you have checked each of these possibilities, turn the printer off, wait for about 10 seconds, and then turn the

printer back on. This often fixes the problem.

Solving printing problems

Multiple-language PDFs do not print

The documents contain unavailable fonts.

Open the document you want to print in Adobe Acrobat.

Click the printer icon.
The Print dialog appears.

Select Print as image.

Click OK.

Printer control panel display is blank or displays only diamonds

The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.
If

Performing Self Test

and

Ready

do not appear, turn the printer off and contact Customer Support.

Error message about reading USB drive appears

Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices,

contact the place where you purchased your printer.

Troubleshooting

189

Содержание Color 1826















































































































































































































































Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды

InfoPrint Color 1826, Руководство пользователя

Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды