InfoPrint Color 1826 Скачать руководство пользователя

Страница: 159 / 238

250.yy Paper jam <area name>

Clear the paper path.

Open the front door, and then remove the jammed paper.

Hold the fuser cover down, and then remove the jammed paper from inside the fuser.

Close the fuser cover, and then close the front door.

Press to clear the message and continue printing.

290–292 ADF Scanning Jams

The scanner failed to feed one or more pages through the ADF.

Remove all pages from the ADF.

Note: The message clears when the pages are removed from the ADF.

Flex and fan the pages.

Place the pages in the ADF.

Adjust the ADF guides.

From the printer control panel, press

to start a black only job or

to start a color job.

293 Paper Missing

The scanner was instructed to scan using the ADF, but there is no paper in the ADF.

Note: The message clears when the pages are placed in the ADF.

Flex and fan the pages.

Place the pages in the ADF.

Adjust the ADF guides.

From the printer control panel, press

to start a black only job or

to start a color job.

293.02 Flatbed Cover Open

Close the scanner cover.

294 ADF Jam

This jam location may also be identified as

294.04 Duplex Sensor Off Jam

294.05 Scan Sensor Off

Jam

, or

294.06 ADF Backfeed Jam

. To clear this jam:

Remove all pages from the ADF.

Note: The message clears when the pages are removed from the ADF.

Flex and fan the pages.

Place the pages in the ADF.

Understanding printer messages

157

Содержание Color 1826















































































































































































































































Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды

InfoPrint Color 1826, Руководство пользователя

Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды