InfoPrint Color 1826 Скачать руководство пользователя

Страница: 160 / 238

Adjust the ADF guides.

From the printer control panel, press

to start a black only job or

to start a color job.

840.01 Scanner Disabled

This message indicates that the scanner has been disabled by the system support person.

840.02 Scanner Auto Disabled

This message indicates the printer identified a problem with the scanner and automatically disabled it.

Remove all pages from the ADF.

Turn the printer off.

Wait 15 seconds and then turn the printer on.

Place the document in the ADF.

Press

to start a black only job or

to start a color job.

Note: If turning the printer off and then on again does not clear the message, contact your system support person.

940.01

Press down on the cyan toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10 seconds,

and then turn the printer back on

941.01

Press down on the magenta toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10

seconds, and then turn the printer back on.

942.01

Press down on the yellow toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10

seconds, and then turn the printer back on

943.01

Press down on the black toner cartridge to make sure it is installed properly. Turn the printer off, wait about 10

seconds, and then turn the printer back on

940.02

The cyan toner cartridge needs maintenance. Call for service.

941.02

The magenta toner cartridge needs maintenance. Call for service.

Understanding printer messages

158

Содержание Color 1826















































































































































































































































Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды

InfoPrint Color 1826, Руководство пользователя

Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды