InfoPrint Color 1826, Руководство пользователя

Страница: 34 / 238

Verifying printer setup
Once all hardware and software options are installed and the printer is turned on, verify that the printer is set up
correctly by printing the following:
•
Menu settings page—Use this page to verify that all printer options are installed correctly. A list of installed
options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed
correctly. Remove the option and install it again.
•
Network setup page—If your printer is a network model and is attached to a network, print a network setup
page to verify the network connection. This page also provides important information that aids network printing
configuration.
Printing menu settings pages
Print menu settings pages to review the current menu settings and to verify printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings pages list all the factory
default settings. Once you select and save other settings from the menus, they replace the factory default settings
as user default settings . A user default setting remains in effect until you access the menu again, choose another value,
and save it. To restore the factory default settings, see “Restoring the factory default settings” on page 186.
1
Make sure the printer is on and
Ready
appears.
2
From the printer control panel, press .
3
Press the arrow buttons until
Reports
appears, and then press .
4
Press the arrow buttons until
Menu Settings Page
appears, and then press .
After the menu settings pages print,
Ready
appears.
Printing a network setup page
If the printer is attached to a network, print a network setup page to verify the network connection. This page also
provides important information that aids network printing configuration.
1
Make sure the printer is on and
Ready
appears.
2
From the printer control panel, press .
3
Press the arrow buttons until
Reports
appears, and then press .
4
Press the arrow buttons until
Network Setup Page
appears, and then press .
After the network setup page prints,
Ready
appears.
5
Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning. Consult
a system support person for a solution, and then print another network setup page.
Additional printer setup
32