InfoPrint Color 1826 Скачать руководство пользователя

Страница: 219 / 238

Notices

Product information

Machine type:
4989, 7525
Model(s):
131, 336, 356, 382, 386, dn1, dn2, xn2, dw1, dw2, g01, g02, gd1, gd2

Edition notice

September 2008
The following paragraph does not apply to any country where such provisions are inconsistent with local

law: THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this

statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the

information herein; these changes will be incorporated in later editions. Improvements or changes in the products

or the programs described may be made at any time.
© 2008 Lexmark International, Inc.
All rights reserved.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer

software and documentation developed exclusively at private expense.

Federal Communications Commission (FCC) compliance
information statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may cause undesired operation

Notices

217

Содержание Color 1826















































































































































































































































Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды

InfoPrint Color 1826, Руководство пользователя

Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды