InfoPrint Color 1826 Скачать руководство пользователя

Страница: 152 / 238

Printing error

A job sent from a USB drive was not successfully received. Wait for the message to clear and then try sending the job

again.

Programming Code

The printer is receiving a file that is a code update. Wait for the message to clear.

Warning—Potential Damage: Do not turn the printer off while this message appears on the display.

Reading data

A PictBridge enabled device is connected, and the printer is reading data from the device. Wait for the message to

clear.

Warning—Potential Damage: Do not remove the device or turn the printer power off while

Reading data

appears on the display.

Reading error (Remove drive)

The printer was reading information from a USB drive and encountered an error. The USB drive must be removed

from the printer to clear the message.

Ready

The printer is ready to receive print jobs.

Receiving pXX

The printer is receiving a fax.

pXX

represents the number of pages received. Wait for the message to clear.

Reload printed pages in Tray <x>

•

Press to clear the message and continue processing the second side of the sheet.

•

Press , and then press to cancel printing.

Remote Management Active

The printer is offline while it configures settings. Wait for the message to clear.

Remove originals from the scanner ADF

Remove the paper from the ADF to clear the message and continue printing.

Remove packaging material

Check for and remove any packaging materials from the toner cartridges.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.

Understanding printer messages

150

Содержание Color 1826















































































































































































































































Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды

InfoPrint Color 1826, Руководство пользователя

Результаты поиска

Содержание Color 1826

Отзывы:

Похожие инструкции для Color 1826

Бренды по названию

Популярные бренды