ICS Linker IIa, Руководство пользователя

Страница: 64 / 76

63
FUNCTION: OR RX 1 COS AND CTCSS INPUTS
FUNCTION CODE:
123
PURPOSE:
Requires an OR condition for a valid RX1 ACTIVE condition
HOW TO USE:
1.
Key up
2. Enter the SET RX1 COS TO OR function code
3. Unkey
4. The controller sends the COMMAND ACCEPTED indication
5. The controller is now in OR mode on receiver 1 (RX1, port 1)
This function when enabled will set the receiver #1 input (RX1) to require both the RX1 main input and the RX1
CTCSS input to be active (OR condition) before an active receiver condition is recognized by the controller.
To make this function permanent (Function stays active after power up or reset) the SAVE STATUSES function
(function # 87) must be used.
FUNCTION: OR RX 2 COS AND CTCSS INPUTS
FUNCTION CODE:
124
PURPOSE:
Requires an OR condition for a valid RX1 ACTIVE condition
HOW TO USE:
1.
Key up
2. Enter the SET RX2 COS TO OR function code
3. Unkey
4. The controller sends the COMMAND ACCEPTED indication
5. The controller is now in OR mode on receiver 2 (RX2, port 2)
This function when enabled will set the receiver #1 input (RX1) to require both the RX2 main input and the RX2
CTCSS input to be active (OR condition) before an active receiver condition is recognized by the controller.
To make this function permanent (Function stays active after power up or reset) the SAVE STATUSES function
(function # 87) must be used.