ICS Linker IIa, Руководство пользователя

Страница: 36 / 76

35
FUNCTION:
SET IDER RX POLITE ID TIME
FUNCTION CODE:
67
PURPOSE:
Sets the time to hold off the ID if the pending ID timer has timed out and the RX
is active
HOW TO USE:
1.
Key up
2. Enter the SET IDER RX ACTIVE HOLD OFF TIME function code
3. Unkey
4. The controller sends the ENTER NEXT DATA indication
5. Key up
6. Enter the time in seconds for the hold off time
7. Unkey
8. The controller sends the COMMAND ACCEPTED indication
9. The new time value is stored
The time range is from 30 seconds to 2500 seconds. If a value is entered outside these limits the controller will not
save the entered value, it will give the ERROR indication (B in CW) and the function will be ended.
FUNCTION:
SET IDER PENDING ID TIMER
FUNCTION CODE:
68
PURPOSE:
Sets the time the IDer will wait before it tries to ID
HOW TO USE:
1.
Key up
2. Enter the SET IDER PENDING ID function code
3. Unkey
4. The controller sends the ENTER NEXT DATA indication
5. Key up
6. Enter the time in seconds for the pending ID time
7. Unkey
8. The controller sends the COMMAND ACCEPTED
9. The value is changed.
The time range is from 30 seconds to 2500 seconds. If a value is entered outside these limits the controller will not
save the entered value, it will give the ERROR indication (B in CW) and the function will be ended.