ICS Linker IIa, Руководство пользователя

Страница: 34 / 76

33
FUNCTION:
DISABLE_IDER
FUNCTION CODE:
63
PURPOSE:
To keep IDer from IDing
HOW TO USE:
1.
Key up
2. Enter the DISABLE_IDER function code
3. Unkey
4. The controller will send the COMMAND ACCEPTED indication
5.
The controller’s IDer will now be disabled...
If the IDer was enabled on power up the save statuses function will need to be run. This will store the new IDer status
(along with others). This needs to be done or the IDer status will return to the way it was the last time the controller
was powered up.
To make this function permanent (Function stays active after power up or reset) the SAVE STATUSES function
(function # 87) must be used.
FUNCTION:
TURN ON TEST TONE
FUNCTION CODE:
64
PURPOSE:
To provide an audio test signal from the controller
HOW TO USE:
1.
Key up
2. Enter the TURN ON TEST TONE function code
3. Unkey
4. The controller sends the COMMAND ACCEPTED indication
5. The controller will send a continuous tone at the frequency that is currently set.
This function will not cause the transmitter to stay on. It only provides the tone from the tone output. The transmitter
can be locked on by using the TX 1 force on function (#85).