50
FUNCTION:
USE ONLY RX 2 CTCSS INPUT
FUNCTION CODE:
97
PURPOSE:
Changes the input RX 2 uses to the RX 2 CTCSS input
HOW TO USE:
1.
Key up
2.
Enter the USE ONLY RX 2 CTCSS INPUT function code
3.
Unkey
4.
The controller sends the COMMAND ACCEPTED indication
5.
The controller will now look for a valid signal from the RX 2 CTCSS input for a valid receive signal
This function switches control for RX 2 the RX 2 CTCSS input.
This function status will
not
be saved with the SAVE STATUSES command.
FUNCTION:
AND RX 2 COS AND CTCSS INPUTS
FUNCTION CODE:
98
PURPOSE:
Requires an AND condition for a valid RX 2 receiver active signal
HOW TO USE:
1.
Key up
2.
Enter the AND RX 2 COS AND CTCSS INPUTS function code
3.
Unkey
4.
The controller sends the COMMAND ACCEPTED indication
5.
The controller is now in AND mode on receiver 2 (RX2, port 2)
This function, when enabled will set the receiver #2 input (RX 2) to require both the RX 2 COS input and the RX 2
CTCSS input to be active (AND condition) before an active RX 2 receive signal is recognized by the software.
To make this function permanent (Function stays active after power up or reset) the SAVE STATUSES function
(Function #87) must be used.
Содержание Linker IIa
Страница 12: ...11...
