ICS Linker IIa, Руководство пользователя

Страница: 58 / 76

57
FUNCTION:
DISABLE RX 1 CTCSS ENCODE ACTIVATE
FUNCTION CODE:
111
PURPOSE
To not allow RX 1 to activate the encode on TX 1 when RX 1 is active
HOW TO USE:
1.
Keyup
2. Enter the DISABLE RX 1 CTCSS ENCODE ACTIVATE function code
3. Unkey
4. The controller sends the COMMAND ACCEPTED indication.
5. RX 1 will now not activate the CTCSS encode on TX 1 when RX 1 is active.
To make this function permanent (function stays active after power up or reset) the SAVE STATUSES function
(function # 87) must be used.
FUNCTION:
ENABLE RX 2 CTCSS ENCODE ACTIVATE
FUNCTION CODE:
112
PURPOSE
To allow activation of the CTCSS encode on TX 1 when RX 2 is active
HOW TO USE:
1.
Keyup
2. Enter the ENABLE RX 2 CTCSS ENCODE ACTIVATE function code
3. Unkey
4. The controller sends the COMMAND ACCEPTED indication.
5. RX 2 will now activate the CTCSS encode on TX 1 when RX 2 is active.
To make this function permanent (function stays active after power up or reset) the SAVE STATUSES function
(function # 87) must be used. This function is a factory default.