ICS Linker IIa, Руководство пользователя

Страница: 32 / 76

31
FUNCTION:
EXIT SETUP MODE
FUNCTION CODE:
59
PURPOSE:
Takes the controller out of the Setup mode
HOW TO USE:
1.
Key up
2. Enter the EXIT SETUP MODE function code
3. Unkey
4. The controller sends the COMMAND ACCEPTED indication
5. The controller will not be in the setup mode.
Exiting the Setup mode with this command will occur regardless of the position of the setup jumper.
FUNCTION:
SET CONTROL OPERATOR MODE
FUNCTION CODE:
60
PURPOSE:
Puts the controller in the Control operator mode
HOW TO USE:
1.
Key up
2. Enter the SET CONTROL OPERATOR MODE function code
3. Unkey
4. The controller sends the COMMAND ACCEPTED indication
5. The controller will be in the Control operator mode..
If the Control operator mode is enabled during the Setup mode it will have no effect until exiting the setup mode.
Upon exiting the setup mode the controller will be in Control operator mode. The controller can be both in Setup
mode and Control operator mode at the same time but the Setup mode has priority.
The control operator mode operates exactly like the user mode except it will allow access to DTMF command lines
that are set to be accessible in the control operator mode.