ICS Linker IIa, Руководство пользователя

Страница: 40 / 76

39
FUNCTION:
CLEAR ONE DTMF COMMAND LINE
FUNCTION CODE:
75
PURPOSE:
To clear only one DTMF command line
HOW TO USE:
1.
Key up
2. Enter the CLEAR ONE DTMF COMMAND LINE function code
3. Unkey
4. The controller sends the ENTER NEXT DATA indication
5. Key up
6. Enter the memory number of the DTMF line to clear
7. Unkey
8. The controller will send the COMMAND ACCEPTED indication
9. The DTMF codes in the selected line / memory are now cleared from the EEPROM
If it is desired to clear all of the DTMF command lines / memories from the EEPROM the CLEAR ALL DTMF
COMMAND LINES function may be used.
FUNCTION:
ENTER NEW ID
FUNCTION CODE:
76
PURPOSE:
To set the information the IDer sends
HOW TO USE:
1.
Key up
2. Enter the ENTER NEW ID function code
3. Unkey
4. The controller sends the ENTER NEXT DATA indication
5. Key up
6.
Hold the key while entering in a series of 0’s, 1’s and 2’s.
7.
The 0’s will enter a space, the 1’s will enter a DIT and the 2’s will enter a DAH.
8. When all the information is entered unkey.
9. The controller sends the COMMAND ACCEPTED indication
10. The new ID is stored
There is enough room to store as much as two call signs. If the controller did not like the information it received the
controller will not save the entered data and it will give the ERROR or BAD VALUE indication (B in CW) and the
function will be ended.