34
FUNCTION:
TURN OFF TEST TONE
FUNCTION CODE:
65
PURPOSE:
To turn off the test tone signal from the controller
HOW TO USE:
1.
Key up
2.
Enter the TURN OFF TEST TONE function code
3.
Unkey
4.
The controller sends the COMMAND ACCEPTED indication
5.
The controller will stop sending the test tone
FUNCTION:
SET PARAMETERS TO THE FACTORY DEFAULT
FUNCTION CODE:
66
PURPOSE:
Reset the listed parameters to the factory defaults
HOW TO USE:
1.
Key up
2.
Enter the SET PARAMETERS TO THE FACTORY DEFAULT function code
3.
Unkey
4.
The controller sends the COMMAND ACCEPTED indication
5.
The Parameters are now set to the Factory Defaults
The factory defaults are as follows:
1. Words per minute
10 WPM
2. CW frequency
1000Hz
3. TX 1 timeout time
600 seconds
4. TX 1 Hang time
2 seconds
5. RX 1 COR and CTCSS input levels
2.5V positive action
6. RX 2 COR and CTCSS input levels
2.5V positive action
7. Number of remote base memories
10
8. Auxiliary 1 output timer time
600 seconds
9. IDer RX active hold off time
150 seconds
10. IDer interval time
600 seconds
11. Statuses are set to defaults (See SAVE STATUSES Function (#87))
Содержание Linker IIa
Страница 12: ...11...
