IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 127 / 184

Chapter 6. Solving Problems
113
Text message format
This section shows the format of the diagnostic text messages that might appear in
the detailed test log and summary log when running the diagnostic programs.
The diagnostic text message format is as follows:
Function Name: Result (test specific string)
where:
Function Name The name of the function being tested when the error
occurred. This corresponds to the function code (fff) shown
in the previous list.
Result This can be one of the following:
Passed This result occurs when the diagnostic
test is completed without any errors.
Failed This result occurs when the diagnostic
test discovers an error.
User Aborted This result occurs when you stop the
diagnostic test before it is complete.
Not Applicable This result occurs when you specify a
diagnostic test for a device that is not
present.
Aborted This result occurs when the test could
not proceed, for example, because of
the system configuration.
Warning This result occurs when a possible
problem is reported during the
diagnostic test, such as when a device
that is to be tested is not installed.
test specific string Additional information that you can use to analyze the
problem.
Viewing the test log
When the tests have been completed, you can view the test log by selecting Utility
from the top of the screen and then selecting View Test Log .
Notes:
1. You can view the test log only while you are in the diagnostic programs. When
you exit the diagnostic programs, the test log is cleared (saved test logs are not
affected). To save the test log so that you can view it later, click
Save Log on the
diagnostic programs screen and specify a location and name for the saved log
file.
2. To save the test log to a diskette, you must use a diskette that you have formatted
yourself; this function does not work with preformatted diskettes. If the diskette
has sufficient space for the test log, the diskette may contain other data.
Viewing the System Event/Error log
You can also view the System Event/Error log from the diagnostic programs. See the
instructions at “Error logs” on page 110.