IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 99 / 184

Chapter 5. Installing options
85
7. Verify that the dc power and ac power LEDs on the front of the power supply are
lit, indicating that the power supply is operating properly.
8. If you have other options to install or remove, do so now; otherwise, go to
“Completing the installation” on page 86.
Replacing a hot-swap fan
The server comes with six hot-swap fans. You do not need to turn off the power to the
server to replace a hot-swap fan.
Attention: If a fan fails, replace it within 48 hours to help ensure proper cooling.
Complete the following steps to replace a hot-swap fan:
1. Read the safety precautions beginning on page 53, and “Working inside the
server with the power on” on page 52.
2. Remove the top cover (see “Removing the server top cover and bezel” on page
66).
Attention: To ensure proper system cooling, do not leave the top cover off the
server for more than 30 minutes.
3. Lift up the free end of the fan-locking handle and pull upward on the handle to lift
the fan out of the server.
4. Open the locking handle on the replacement fan, lower the fan into its socket, and
rotate the handle to the locked position.
Hot-swap fan 4
Hot-swap fan 3
Hot-swap fan 5
Hot-swap fan 2
Hot-swap fan 6
Hot-swap fan 1