IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 86 / 184

72
IBM® xSeries 360: User’s Reference
4. Slide the expansion-slot cover up out of the server and move the blue PCI-
adapter locking lever (near the rear of the Remote Supervisor Adapter) to the right
(as viewed from the front) to permit inserting the ServeRAID adapter.
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD),
take precautions to avoid damage from static electricity. For details on handling
these devices, see “Handling static-sensitive devices” on page 52.
5. Remove the ServeRAID adapter from the static-protective package and install the
adapter, pressing it
firmly into the selected PCI-X slot.
6. Move the blue PCI-adapter locking lever to the left (as viewed from the front) to
secure the adapter; then, lower the adapter-retention latch over the top corner of
the adapter. The orange adapter-retention tab snaps into place.
7. For internal hard disk drive connections:
a. Plug in one end of the ServeRAID internal channel cable (shipped with the
server) to an internal ServeRAID channel connector on the top edge of the
ServeRAID adapter as shown in the following illustration. You can install the
adapter in any PCI-X slot. It is shown in slot 6 here only as an example.
b. Route the cable along the surface of the system board toward the front of the
server, then to the right under the adapters and dividers, and plug it into the
SCSI RAID cable connector (J43) on the system board.
Notes:
1) You cannot install a full-length, wide adapter in PCI-X slot 1 if the SCSI
RAID adapter cable connector is in use.
2) You might need to remove adapters or plastic dividers to access the
ServeRAID connector on the system board.
8. Refer to the documentation provided with the ServeRAID adapter for information
about installing the ServeRAID software and configuring the ServeRAID adapter.
9. If you have other options to install or remove, do so now; otherwise, go to
“Completing the installation” on page 86.
ServeRAID adapter
SCSI RAID
cable connector