IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 115 / 184

Chapter 6. Solving Problems
101
161 The real-time clock battery has failed.
Action: Replace the battery yourself or call for service.
You can use the server until you replace the battery. However, you must
run the Configuration/Setup Utility program and set the time and date and
other custom settings each time you turn on the server.
162 A change in device configuration occurred. This error occurs under one or
more of the following conditions:
• A new device has been installed.
• A device has been moved to a different location or cable connection.
• A device has been removed or disconnected from a cable.
• A device is failing and is no longer recognized by the server as being
installed.
• An external device is not turned on.
• An invalid checksum is detected in the battery-backed memory.
Action: Verify that all external devices are turned on. You must turn on
external devices before turning on the server.
If you did not add, remove, or change the location of a device, a device is
probably failing. Running the diagnostic test might isolate the failing
device.
If you cannot isolate and correct the problem, call for service.
163 The time of day has not been set.
Action: Set the correct date and time. If the date and time are set
correctly and saved, but the 163 error message reappears, call
for service.
You can use the server until the system is serviced, but any application
programs that use the date and time will be affected.
Table 12. POST error messages.
POST message Description