IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 133 / 184

Chapter 6. Solving Problems
119
202 Microprocessor
cache Aborted Test setup error: BIOS cannot
access VPD information 1. If the server does not
have the most current
level of BIOS code
installed, update the
BIOS code to the most
current level
2. Run the diagnostic
program again.
3. If the problem remains,
replace the failing
processor.
If the problem remains, call
for service.
Test setup error: Corrupt DMI
BIOS. Information in BIOS is
not as expected
Test setup error: No cache
detected on microprocessor
socket id
xyz , or BIOS setup
problem
(where xyz identifies the
microprocessor that is causing
the error message)
Test setup error: Unknown
hardware problem associated
with microprocessor in socket
id
xyz.
(where xyz identifies the
microprocessor that is causing
the error message)
Failed Microprocessor in socket ID
xyz
(where xyz identifies the
microprocessor that is causing
the error message)
Note: The indicated
microprocessor LED
will be on.
1. Reseat the identified
microprocessor.
2. If the problem remains,
replace the
microprocessor.
If the problem remains, call
for service.
Warning Test setup error:
Microprocessor cache is
disabled. Use system setup to
enable before retrying the test Use the Cache Control
choice from the Advanced
Setup menu to enable the
microprocessor cache.
If the problem remains, call
for service.
206 Diskette drive Failed Internal diskette drive bay Call for service.
215 CD-ROM Aborted The CD-ROM drive is not
present Verify that the cables are
properly connected to the
CD-ROM drive.
If the problem remains, call
for service.
Failed On system board Call for service.
217 Hard disk drive Failed BIOS drive # n (where n is the
drive bay number)
Call for service.
301 Keyboard Failed On system board keyboard
test failed 1. Verify that the
keyboard cable is
connected.
2. If the problem remains,
replace the keyboard
cable.
If the problem remains, call
for service.
302 Mouse Failed On system board pointing
device test failed. Replace the pointing
device. If the problem
remains, call for service.
Code Function Result Description Action