IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 40 / 184

26
IBM® xSeries 360: User’s Reference
2. VLANs require Windows 2000 or Windows NT 4.0 with Service Pack 5.0 from
Microsoft.
To join a VLAN from Windows 2000 or Windows NT 4.0:
1. Create a VLAN on the switch. Use the parameters you assign there to join the
VLAN from the server. Refer to the switch documentation for more information.
2. Double-click the ProSet icon in the Control Panel window.
3. Right-click the adapter in the list that you want to add to the VLAN, then click Add
VLAN . Note that VLANs cannot be assigned to adapters that are already defined
to have an adapter teaming option.
4. Type the VLAN ID and VLAN name. The VLAN ID must match the VLAN ID of the
switch. The ID range is from 1 to 1000. The VLAN name is for information only
and does not need to match the name on the switch.
5. Click OK . Repeat steps 3 through 5 for each VLAN you want the server to join.
The VLANs you add are listed on the Adapters page.
6. Click Close and restart the server.
Setting up the Remote Supervisor Adapter
This section identifies the Remote Supervisor Adapter features, prerequisites, and
recommendations. It also explains how to use the documentation effectively and how
to cable and configure the adapter for use on an Advanced System Management
(ASM) network so that you can manage the server from a remote location. For more
detailed information, see the
Remote Supervisor Adapter User’s Guide on the
Documentation CD.
Remote Supervisor Adapter features
The Remote Supervisor Adapter provides the following:
• Continuous health monitoring and control
• Advanced Predictive Failure Analysis (PFA)
• Configurable notification and alerts
• Event logs that are timestamped, saved in nonvolatile memory, and can be
attached to e-mail alerts
• Remote graphics console redirection
• LAN, serial, and Advanced System Management (ASM) interconnect remote
access
• Point-to-point protocol (PPP) support
• Simple Network Management Protocol (SNMP)
• Domain Name System (DNS) and Dynamic Host Configuration Protocol (DHCP)
support
• Remote power control
• Microsoft Windows NT and Windows 2000 blue-screen capture
• Remote firmware update and access to critical server settings
• Optional independent power, which enables around-the-clock access to the
server even if the server is powered off