IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 101 / 184

Chapter 5. Installing options
87
configuration has changed. The Configuration/Setup Utility program automatically
starts so that you can save the new configuration information. See Chapter 3,
“Configuring the server,” on page 13.
Some options have device drivers that you need to install. See the documentation
that comes with the option for information about installing any required device drivers.
The server comes with at least one microprocessor installed on the system board. If
you have installed one or more additional microprocessors, the server can now
operate as an SMP server. Therefore, you might need to upgrade the operating
system to support SMP. See Chapter 4, “Using the ServerGuide™ CDs,” on page 45
and the operating-system documentation for additional information.
If the server has a ServeRAID adapter installed and you have installed or removed a
hard disk drive, see the documentation that comes with the ServeRAID adapter for
information about reconfiguring the disk arrays.
If you are using the Remote Supervisor Adapter to manage the server from a remote
location, see “Setting up the Remote Supervisor Adapter” on page 26 and the
Remote
Supervisor Adapter User’s Guide on the xSeries 360 Documentation CD for
information about setting up and configuring the adapter and using the adapter to
manage the server remotely.
Connecting external options
You can attach external options to the input/output (I/O) connectors on the rear of the
server. (See“Input/output ports” for more information.)
Complete the following steps to attach an external device:
1. Read the safety precautions beginning on page 53, and the documentation that
comes with the options.
2. Turn off the server and all attached devices.
3. Follow the instructions that come with the option to prepare it for installation and
to connect it to the server.
Input/output ports
This section provides information about the following input/output (I/O) ports on the
front and rear panels of the server:
• Three Universal Serial Bus (USB) ports (one front, two rear)
• One video port
• One keyboard port
• One auxiliary-device (pointing device) port
• One RXE management port
• One RXE expansion port
• One Ethernet port
• Remote Supervisor Adapter ports
— One ASM interconnect (peer-to-peer) port
— One Ethernet port (remote server management using a network)
— One serial port (remote server management using a modem)
— One external power connector