IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 92 / 184

78
IBM® xSeries 360: User’s Reference
5. Touch the static-protective package that contains the DIMM option to any
unpainted metal surface on the server. Then, remove the DIMM from the
package.
6. Turn the DIMM so that the DIMM keys align correctly with the slot.
Attention: To avoid breaking the DIMM locking latches or damaging the DIMM
slots, handle the latches gently.
7. Ensure that the DIMM locking latches are in the open position. Insert the DIMM
by pressing it straight into the slot. Make sure that the locking latches snap into
the closed position. If a gap exists between the DIMM and the latches, the DIMM
has not been properly installed. In this case, open the latches, remove the DIMM,
and reinsert it.
8. Repeat steps 4 through 7 for each additional DIMM that you install.
9. Install the memory board:
a. Align the board in the guides over the connector.
b. Open the memory-board locking latches and insert the memory board into
the connector. Be sure that the locking latches snap into the closed position.
10. If you have other options to install or remove, do so now; otherwise, go to
“Completing the installation” on page 86.
Attention: When you restart the server, the system displays a message indicating
that the memory configuration has changed.
• If you installed additional memory, start the Configuration/Setup Utility program
and select
Save Settings.
First pair DIMMs 1 and 2
Second pair DIMMs 3 and 4
Third pair DIMMs 5 and 6
Fourth pair DIMMs 7 and 8
DIMM 1
DIMM 3
DIMM 4
DIMM 2
DIMM slot 3
DIMM slot 4
Memory VRM
Test button
Test LED to show
capacitor is charged