IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 141 / 184

Chapter 6. Solving Problems
127
On PCI An error occurred on a PCI/PCI-X
adapter. The failing adapter is
indicated by a lit LED. 1. Remove the top cover, identify the
PCI/PCI-X adapter with the lit
LED, and replace the adapter.
2. If this does not correct the
problem, check the error log for
additional information.
3. If you cannot correct the problem
from the information in the error
log, try to determine the failing
adapter by removing one adapter
at a time and restarting the server
after each adapter is removed.
If the problem remains, call for
service.
On MEM A memory error occurred. 1. Remove the top cover, remove
the memory board, and check the
DIMM error LEDs on the memory
board.
Note: If the server had a DIMM
failure, an LED on the
memory board indicates
the failing DIMM. If the
LED is not visible with the
memory board in its
socket, you can remove
the memory board and
press the button on the
board to light the failing
DIMM’s LED.
2. Replace the DIMM indicated by
the lit DIMM error LED.
On VRM A voltage regulator module has failed. 1. Remove the top cover, and check
the VRM error LEDs.
2. Replace the VRM indicated by
the lit VRM error LED.
Table 15. Light Path Diagnostics.
Fault LED on the
operator
information
panel (also
known as front
LED panel)
Level 2
diagnostic panel
LED on
Cause Action