IBM Eserver xSeries 360 Type 8686, Руководство пользователя

Страница: 134 / 184

120
IBM® xSeries 360: User’s Reference
Recovering the BIOS code
If the BIOS code has become damaged, such as from a power failure during a flash
update, you can recover the BIOS code using the flash ROM page swap jumper (J56)
and a BIOS flash diskette.
Note: Use one of the following methods to obtain a BIOS flash diskette:
• Use the ServerGuide program to make a BIOS flash diskette.
• Download a BIOS flash diskette from the World Wide Web at
http://www.ibm.com/pc/support.
• Contact your IBM service representative.
305 Video monitor Not
applicable Any message Refer to the information
that comes with the
monitor.
405 Ethernet Failed In PCI-X slot n
(where n is the PCI-X slot
number in which the failing
Ethernet adapter is installed)
Replace the Ethernet
adapter in slot
n. If the
problem remains, call for
service.
On system board Call for service.
415 Analog/digital
modem Not
applicable No modem was detected 1. Verify that the modem
is properly attached to
the server.
2. If the problem remains,
replace the modem.
If the problem remains, call
for service.
PCI modem detected but not
enabled 1. Change the
configuration to enable
the modem.
2. If the problem remains,
replace the modem.
If the problem remains, call
for service.
Failed Modem reset failed Replace the modem.
If the problem remains, call
for service.
No dial tone detected 1. Make sure that the
phone line attached to
the modem has a dial
tone. (Connect a
phone to the line and
listen, if necessary.) If
there is no tone, have
the phone line
serviced.
2. If the problem remains,
replace the modem.
If the problem remains, call
for service.
Code Function Result Description Action