IBM 315, Дополнение к руководству по техническому обслуживанию оборудования

Страница: 16 / 151

Note
The results of the test appear in the
lower-right-hand Test Log window. Also, if you
enabled Test Logging, the results are recorded in
the Test Log.
3. When the test completes, press Esc to return to the
Test Group Menu.
Stopping the Tests
To stop running a specific test or stop testing after you
have started a test, press Esc while the test is running.
The test pauses at the first possible opportunity, and the
Skip/Abort Test Menu appears with the following options:
Diagnostics Control Keys
The following is a list of the Diagnostics Control Keys,
when used and a description of the diagnostics response.
Option Action
Continue The test program begins testing where it left
off.
Skip to
next test The test program skips the current test, but
remaining tests for the selected Test Module
continue.
Skip to
next group The test program skips the remaining tests in
the current test group.
Abort all
tests The test program stops and returns to the
previous menu.
Control
Keys When
Used Diagnostics Response
Ctrl+A Main Menu Allows you to select test
from the sub menus that are
highlighted with red letters.
Attention
If selected, these tests
will erase the
information stored on
the diskette or hard
disk drive.
Up and
Down
Arrow Keys Main Menu
Module
Test Menu
Test Group
Menu Highlights an item you want
to select.
General Checkout/Diagnostics
11