IBM 315, Дополнение к руководству по техническому обслуживанию оборудования

Страница: 42 / 151

PCNTNW-DOS-65 Device not found at IOADDRESS.
Explanation: The device was not found at the IO address
specified in the NET.CFG file. The driver cannot find an
Ethernet controller in the server.
Action: Verify that the IO address in the NET.CFG file
matches with the with the board. Otherwise, remove the
PORT keyword from the NET.CFG file.
PCNTNW-DOS-67 PCI scan specified, device not found.
Explanation: The driver cannot locate the Ethernet
controller on the PCI bus.
Action: Do the following:
1. Verify that the Ethernet enable jumper is set to the
default (enable) position.
2. Use the BUSTYPE keyword to specify a value of
PCI1.
3. If the problem persists, go to “100/10 Ethernet
Diagnostics” on page 52 to run the Ethernet
diagnostics.
PCNTNW-DOS-75 Unsupported bus ID specified.
Explanation: The bus ID number specified in the
NET.CFG file is not supported by Novell.
Action: Correct the bus ID number in the NET.CFG file.
PCNTNW-DOS-76 Wrong bus ID specified.
Explanation: The bus ID number specified in the
NET.CFG file is different from the bus type found in the
server.
Action: Correct the bus ID number in the NET.CFG.
PCNTNW-DOS-80 The DMA parameter is not necessary
for PCI device.
Explanation: The board does not require a DMA setting.
Action: Edit the NET.CFG file to delete the DMA
parameter.
38
PC Server HMM