IBM 315 Скачать руководство пользователя страница 45

Страница: 45 / 151

NDIS 2.01 Driver Messages:

The following error

messages are for the NDIS 2.01 drivers. The explanation
and recommended action are included with each message.

PCNTND-DOS-1 Unable to open the Protocol Manager.

Explanation: The NDIS stack is not configured properly.

Action: Check and correct the configuration.

PCNTND-DOS-6 Out of memory while allocating

buffers.

Explanation: The driver could not allocate the requested
buffers.

Action: Check the system configuration. Edit the
PROTOCOL.INI file to reduce the number of Txbuffers and
Rxbuffers specified for the driver.

PCNTND-DOS-7 Protocol Manager device error.

Explanation: The NDIS stack is not configured properly.

Action: Check and correct the configuration.

PCNTND-DOS-8 Bad status for Protocol Manager.

Explanation: The NDIS stack is not configured correctly.

Action: Check and correct the configuration.

PCNTND-DOS-9 Cannot find PROTOCOL.INI entry.

Explanation: The NDIS stack is not configured properly
in the PROTOCOL.INI file.

Action: Check and correct the configuration.

PCNTND-DOS-10 The Protocol Manager ioctl failed.

Explanation: The NDIS stack is not configured properly
in the PROTOCOL.INI file.

Action: Check and correct the configuration.

PCNTND-DOS-11 Protocol Manager registration failed.

Explanation: The NDIS stack is not configured properly.

Action: Check and correct the configuration.

PCNTND-DOS-15 Device not found.

Explanation: The driver cannot find an Ethernet
controller in the server.

Action: Do the following:

1. Verify that the Ethernet enable jumper is set to the

default (enable) position.

2. If the problem persists, go to “General Checkout” on

page 2.

3. Replace the system board.

PC Server 315 - Type 8638

Содержание 315
























































































































































Результаты поиска

Содержание 315

Отзывы:

Похожие инструкции для 315

Бренды по названию

Популярные бренды

IBM 315, Дополнение к руководству по техническому обслуживанию оборудования

Результаты поиска

Содержание 315

Отзывы:

Похожие инструкции для 315

Бренды по названию

Популярные бренды