IBM 315, Дополнение к руководству по техническому обслуживанию оборудования, Страница: 68 / 151

Replacing a Processor
Orientate the processor so that the pins on the processor
align with the holes in the processor socket when the lever
is in the vertical position. The processor should fit easily
into the processor socket.
Important
Do not force the processor or damage my occur.
SCSISelect Utility Program
The SCSI adapter comes with a menu-driven configuration
utility program, called SCSISelect, that allows you to view
and change SCSI settings.
You can use the SCSISelect Utility program to:
Ÿ
Change the default values
Ÿ
Verify and change configuration conflicts
Ÿ
Format a new SCSI hard disk
Starting the SCSISelect Utility Program:
You can access this program when you start the server.
The SCSISelect prompt appears after the IBM logo screen
appears briefly and then disappears. Press Ctrl
+
A
immediately after the SCSISelect prompt appears. Use
the Up Arrow (
↑
) or Down Arrow (
↓
) key to move the
highlight bar to the various menu choices. Press Esc to
return to the previous menu. Also, you can press the F5
key to switch between color and monochrome modes (if
the monitor permits). To change the settings of the
displayed items, follow the directions on the screen.
SCSISelect Utility Program Options:
The
following options appear on the SCSISelect Utility program
menu:
Ÿ
Configure/View Host Adapter Settings
Ÿ
SCSI Disk Utilities
Configure/View Host Adapter Settings:
To view or
change the SCSI controller settings, select
Configure/View Host Adapter Settings and follow the
directions on the screen. This menu has the following
selections:
Ÿ
Host Adapter SCSI ID
Select this choice to change the SCSI ID of the SCSI
controller from its default value of 7.
Ÿ
SCSI Parity Checking
Select this choice to enable or disable SCSI adapter
parity checking. The default value is
Enabled. This
setting should not be changed.
Ÿ
Host Adapter SCSI Termination
Select this choice to configure SCSI controller
termination.
64
PC Server HMM