IBM 315, Дополнение к руководству по техническому обслуживанию оборудования, Страница: 126 / 151

Error Message/Symptom FRU/Action
Sorry You Need A Mouse
Mouse or mouse driver was
not detected. 1. Mouse
2. System Board
System Hangs
Go to “Undetermined
Problem” on page 79. 1. Any device
2. Any adapter
3. System Board
The Address Exceeds The
Size Of Your Memory
An invalid memory address
was entered. The
Diagnostics Tests display
this message during the
Locate Bad Chips option
under the interact menu if
an invalid memory address
was entered at the "Enter
Memory Address Of Bad
Chip" prompt. 1. Enter correct address
2. Memory Module
3. System Board
That Number is Out Of
Range
An invalid bit number was
entered. Diagnostics Tests
display this message during
the Locate Bad Chips
option. 1. Enter the correct
number.
2. Memory Module
3. System Board
Too Many Errors — Test
Aborted
Too many errors, the
Diagnostics Test cannot
continue. 1. Microprocessor
2. System Board
Transmit Error
Internal or external serial
port loopback test failure. 1. Serial Port Cable
2. System Board
Video Adapter Failed
Test Result Summary,
displayed if "Fail" was at the
Quit/Fail/Pass menu of any
video test. 1. Video Adapter
(if installed)
2. System Board
3. Display
Write error on cylinder n
Hard disk drive write error. 1. Hard Disk Drive
2. Hard Disk Drive
Adapter
(if installed)
Write Errors
Diskette drive write error. 1. Diskette
2. Diskette Drive
3. System Board
4. Diskette Drive Cable
Write Protected or
Unformatted
Diskette is Write Protected
or not formatted. 1. Insert a non-write
protected, formatted
diskette into the
diskette drive; then
rerun the test.
2. Diskette Drive
3. System Board
4. Diskette Drive Cable
122
PC Server HMM