IBM 315, Дополнение к руководству по техническому обслуживанию оборудования

Страница: 76 / 151

Attention
If an administrator password is set and then forgotten,
you must move the password jumper to clear the
password and regain access to the
Configuration/Setup utility program. This procedure
erases the current server configuration (see
“Removing an Unknown Power-On/Administrator
Password” on page 62 for more information). You
must then reconfigure the server.
To set an administrator password:
1. Select Administrator Password on the System
Security menu; then, press Enter.
2. Type the password in the Enter Administrator
Password data field.
Note
A password can contain any combination of up to
seven alphanumeric characters (A–Z, a–z, and
0–9). Keep a record of the password in a secure
place.
3. Move the cursor to the Enter Administrator
Password Again data field and type the password
again.
4. Select Set or Change Administrator Password to
save the new password; then, press Enter. The
password becomes effective immediately.
Note
A message appears if the two passwords do not
match. If this happens, press Esc to cancel the
request and return to the System Security menu.
To delete an administrator password:
1. Select Administrator Password on the System
Security menu; then, press Enter.
2. Select Delete Administrator Password; then, press
Enter.
3. A confirmation window appears. Press Enter to
delete the administrator password.
4. Press Esc to return to the System Security menu.
Setting a Power-on Password:
When a power-on
password is set, you must enter a password each time you
start the system.
72
PC Server HMM