IBM 315, Дополнение к руководству по техническому обслуживанию оборудования, Страница: 26 / 151

installing, the device driver will attempt to enable
mastering when it loads. Run the adapter diagnostics
to see if busmastering is allowed in the slot selected.
5. Click on Test.
Notes:
Ÿ
When testing a newly configured adapter, the
network device driver will not be active. The
diagnostic will test only the adapter and its
connection to the network.
Ÿ
When testing a previously configured adapter,
the network device driver will be active. The
diagnostic will test the adapter, its connection to
the network, and the device driver. The test will
also track the actual network activity of the
device driver.
6. When testing completes, click on OK to accept the
configuration. Then, click on OK again.
7. Under Network Adapter, select the IBM 100/10 PCI
Ethernet Adapter. Then, click on Close.
Note:
If you have other LAN protocols installed, such as
TCP/IP, additional screens will appear requesting
configuration information. If this occurs, follow the
instructions on the screen.
8. Remove the Ethernet Configuration and Driver
diskette from drive A.
9. Click on Yes in the Network Settings dialog box to
restart Windows NT Server Version 4.0.
Troubleshooting
Ÿ
Make sure that you are using the device drivers that
come with this adapter.
Ÿ
Make sure that the device driver is loaded and the
protocols are bound. See the Network Bindings
dialog box in Windows NT Server 4.0 to verify this.
Ÿ
Make sure that you are using Category 5 cabling
when operating the Ethernet adapter at 100 Mbps.
Ÿ
Test the adapter using the instructions in “Configuring
for Windows NT Server 4.0” on page 21.
Ÿ
Check with the LAN administrator.
Configuring for Other Operating
Systems
Refer to the help files on the Ethernet Configuration and
Drivers program for instructions on configuring for other
operating systems.
To view the help files:
1. Insert the Ethernet Configuration and Drivers diskette
in drive A, and switch to that drive.
2. At the operating-system prompt, type
SETUP \README
.
3. Press Enter.
22
PC Server HMM