IBM 315, Дополнение к руководству по техническому обслуживанию оборудования, Страница: 12 / 151

Command Line Options
The following Command Line Options are available when
initially loading the diagnostic program from within its
directory of a DOS operating system. Loading
QAPlus/PRO from a DOS system command line allows
selected tests and options to run with minimum memory.
At a DOS operating system prompt, where the
QAPlus/PRO files reside, type QAPLPRO /XXX (where
XXX represents one or more of the following from the list
below) then, press Enter.
Keys Action
Spacebar Toggle modules on/off (or toggle tests on/off)
F2 View test results log
F10 Local menu
+
Next logical unit number (for example, LUN
1, LUN 2, and so on)
−
Previous logical unit number
Command Action
/B&W The /B&W command line option forces
the program to load in Black and White
(Monochrome) mode, which is often
more readable on laptop computers.
/LOG=file The /LOG=file command line option
directs the test programs to start using
a specified Error Log file.
/INT10 The /INT10 command line option forces
the test programs to use the BIOS for
screen writes.
/OXXX The /OXXX command line option,
where XXX=test group (for example,
MBD, MEM, VID, HDU, FDU, KBD,
COM, LPT, and so on), omits the
designated test group from loading.
/OALL The /OALL command line option omits
all test groups from loading. This
command can be used in conjunction
with the /IXXX command.
/IXXX The /IXXX command line option, where
XXX=test group (for example, MBD,
MEM, VID, HDU, FDU, KBD, COM,
LPT, and so on), loads the designated
test group for testing. This option is
helpful if you have insufficient memory
available to load all of the test
programs simultaneously.
/USRCONFIG
=file The /USERCONFIG=file command line
option tells the test programs to look
for a user diagnostic configuration file
other than the default USERDIAG.CFG.
General Checkout/Diagnostics
7