9.
Click View Record to see when a motion was detected on a specified Gate and then
play it back in PACDM™. This data is exported to the P.O.S. database. Earlier data can
be accessed through a calendar.
10. Click Save to save the selected Gate configurations.
Note
Ensure there is NO MOTION occurring in the defined Gate when clicking Save,
otherwise the Intelli-Guard™ function will not work properly for that Gate.
11. To delete one defined target zone, select that Gate by clicking on it, hold down the left
mouse button and drag the arrow off from the live view screen to remove it.
12. To delete all defined target zones, click Reset
Suggestions for using Object Speed
1.
To detect slow moving objects, the Object Speed has to be set to a lower value
2.
To detect fast moving objects, the Object Speed has to be set to a larger value
3.
If the Object Speed value is too low, Intelli-Guard will not count fast moving objects
4.
If the Object Speed value is too high, two unconnected motions on the screen might be
counted as a single object. This will cause the counter to increase continuously.
Related Topics: Control Setup | Communication Setup | Email Setup
Virtual Ruler
Overview
With this feature it is possible to approximate the height of a person once they are in the camera's
view. During playback, the person's height can be estimated with regard to the virtual ruler. (In
the example below, the ruler is 7' long with a division value of 1'.)
77
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/