Note
After the network port settings are changed, the system will automatically restart.
Video Loss Alarm
To configure the Video Loss Alarm menu, do the following:
1.
Check the Enable Alarm checkbox to activate alarm every time that video loss is detected
on any of the cameras.
2.
Check the Enable Sound checkbox for the audible alarm to sound on PC speaker every
time that video loss is detected on any of the cameras.
3.
Choose the Control from the Enable Control No. drop-down menu to be associated
with the video loss. In this example - if there is video loss detected on one of the cameras,
the Control 1 will turn on (e.g. turn on a the light)
4.
Set the Working Time for the control output and audio alarm. In this example, the
Control 1 will stay on and the alarm will sound on the PC speaker for 20 seconds after
video loss occurred on one of the cameras.
Note
In the E-Mail Setup tab, check Enable E-mail for Video Loss to receive an e-mail every
time video loss occurs on one of the cameras.
Hardware Setup
Note
This feature is NOT available on i³Remote.
1.
Choose the port for the Watchdog Card Port from the available COM ports.
52
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/