manualshive.com logo in svg

i3DVR International i3-SRX Series, Руководство пользователя

Поделиться
Скачать
i3DVR International i3-SRX Series Скачать руководство пользователя страница 33

M: Motion recording – the selected camera records only when motion is detected. Motion detection
target zones have to be configured in the Motion Setup. Motion recording can be used on its own
or can be combined with Sensor and/or Pre-alarm recordings.

O/S: Object/Sensor recording – the selected camera records based on the alarms triggered in
the VideoLogix or when the sensor has been triggered. The VideoLogix has to be enabled for
the selected camera and/or sensor has to be enabled and be associated with the specific camera
in Hardware Setup. Object/Sensor recording can be used on its own or can be combined with
Pre-alarm recordings. When combined with M:Motion, O/S:Object/Sensor becomes S:Sensor
recording.

Motion and Sensor recording combined with

Prealarm

O/S Object/Sensor recording combined with

Prealarm

P: Prealarm recording – is combined with either Motion, Motion and Sensor, or Object/Sensor
recording. DVMS stores 5 seconds of video recording in a buffer which is continuously overwritten.
If Prealarm recording is used, a 5-second video buffer is added to the beginning of the recorded
video segment.

28

i³Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at 

http://www.renderx.com/

Содержание i3-SRX Series







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды