Index Search
Note
This feature is NOT available on i³Remote.
Index Search allows for searching a recorded video according to recording type: motion or sensor.
As opposed to the Index Search Panel, this function does not recognize Pre-alarm recording.
After clicking the Index Search
button, the following panels will appear in the Search screen:
To search the available video recording based on Sensor or Motion, do the following:
1.
Select the day in the Calendar window
2.
Select the start time for Index Search. This can be done either from the Clock window
or in the Index Search panel by scrolling the arrows up and down. In this example, the
start time for Index Search is set to 11:57 AM. The Index Search will search all available
video recordings starting at the selected start time until midnight of the same day. An
Index Search can only be performed within one calendar day.
3.
Select the Sensor number that triggered the motion recording (if applicable). Click A for
"All" to select all sensors. Click N for "None" to deselect the chosen sensors.
4.
Select the camera, by number, that recorded based on Motion (if applicable). Click A
for "All" to select all cameras for motion recordings. Click N for "None" to deselect chosen
cameras.
5.
To view a specific frame, click on the desired frame in the list of found frames. The se-
lected frame will be displayed in the Search display window.
Index Search displays the list of frames that meet the requirements (camera number and type
of recording). In the above example, motion occurred on Camera 12 starting 1:17 PM
The Search display window contains the following information:
109
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/