manualshive.com logo in svg

i3DVR International i3-SRX Series, Руководство пользователя

Поделиться
Скачать
i3DVR International i3-SRX Series Скачать руководство пользователя страница 124

7.

To remove a single image from the Selected Image(s) list, select the image and drag-
and-drop it to the Available Image(s) list in the middle. To remove all images, click Re-
move All Images.

8.

Check the Delete temporary Images checkbox in order to delete all selected images
from the current folder.

9.

Click OK to proceed with the snapshot backup.

10. All selected images will be saved into the Snapshot_Backup folder on the selected drive.

Click OK to complete the snapshot backup.

Related Topics: Snapshot Setup

Encrypted Backup

Encrypted backup is i³‘s unique compression method, which records all available camera input
in a single

Note

If backing up to a remote drive, i³Remote Software has to be installed on the remote
computer and the K-Remote Backup Server has to be running. Encrypted backup files
can only be played in the i³Remote Software.

119

Backup on i³Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at 

http://www.renderx.com/

Содержание i3-SRX Series







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды