manualshive.com logo in svg

i3DVR International i3-SRX Series, Руководство пользователя

Поделиться
Скачать
i3DVR International i3-SRX Series Скачать руководство пользователя страница 94

ii.

Click Open

6.

Set the Duration of Sound (1 – 100 sec) to determine how long the *.wav file will play

7.

Configure the Area Alarm Setting for the selected detection zone by selecting one of
the following conditions:

a.

In the Condition drop-down menu, choose any to trigger an alarm every time hu-
man/vehicle/object presence is detected in the defined area.

b.

In the Condition drop-down menu, choose “=? (equal to) in the drop-down menu
and enter the desired number of persons/vehicles/objects. This way the alarm will
be triggered only if the specified number of persons/vehicles/objects is met in the
defined area.

c.

In the Condition drop-down menu, choose “>=? (greater or equal to) in the drop-
down menu and enter the desired number of persons/vehicles/objects. This way
the alarm will be triggered only if the specified number of persons/vehicles/objects
is met or exceeded in the defined area.

Configuring CrossWire alarm

The CrossWire alarm detects any human/vehicle/object that is crosses the specified boundaries
in a predetermined direction and initiates an alarm.

Please note that the CrossWire alarm option will not be available for the overhead-mounted
cameras and in the crowded locations.

89

i³Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at 

http://www.renderx.com/

Содержание i3-SRX Series







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды