2.
Choose the camera in the Timeline bar for an Object Search
Note
An Object Search can only be performed one camera at a time.
3.
Select the Start Time and the End Time in the Clock window. Only the selected part
of the video recording will be processed by the Object Search. An Object Search can
only be performed within one calendar day
4.
Click the Grid button
to remove the grid or to overlay the grid on the video image
for easier area selection
5.
Click the Mesh button
to remove the blue mesh or to highlight the selected search
area
6.
Click the Object Search Output button
to hide/display the separate Object Search
window
7.
Highlight the area to be searched. Click on the screen. Hold the left mouse button down
and drag the mouse until the desired area is covered. To remove the selection, hold the
right mouse button and drag to deselect the area.
If no area is selected, the following error message will appear:
8.
Click the Object Search Start button
to start the Object Search
9.
Wait while the Object Search is processing the data
10. When the Object Search is finished, one of the following message should appear:
a.
No object motion was detected on the selected camera within the selected time
period
111
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/