Preset Touring - this setup allows for the configuration of the presets used by
the Preset Touring function.
Preset Setup - this menu allows for the set up of up to 10 pre-
sets for each PTZ camera. A preset is the unique combination
of Pan, Tilt and Zoom values for each camera that gets recorded
and stored by the i³Server. After the preset is programmed, only
one button has to be clicked to position the camera in the spe-
cific direction and/or zoom in/out instantly. The presets con-
figured in this menu are also used by Intelli-Zone™ and the
Preset Touring function.
To configure the presets for a PTZ camera, do the following:
1.
Enter the PTZ mode by clicking on the PTZ camera on the main screen.
2.
Locate the Preset menu in the bottom of the screen:
3.
Click Get Preset. The button will become Program Preset
4.
Program the desired Preset (see instructions below).
Note
PTZ function has to be enabled and Camera ID has to be assigned for all PTZ
cameras in Hardware Setup.
5.
AFTER programming the preset, click the Preset number (1-10).The preset gets recorded
once the preset number is clicked.
6.
Exit PTZ mode
Program the desired Preset with the PTZ window buttons:
1.
Adjust camera Pan-Tilt position by clicking the arrows up and down for Tilt; left and right
for Pan.
2.
Increase/Decrease Pan/Tilt speed by clicking the arrows. The higher the speed, the
faster the PTZ camera will move in response to the user command.
3.
Focus and Zoom in/out by clicking + and - signs
OR
14
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
