10. Once the allocation is complete, the i³Server will start normally
E-Map Setup
Overview
The E-Map function allows to lay out cameras on a map for quick launch of a specific camera.
Positioning of the cameras, controls and sensors is done on an existing digital drawing/map. The
map appears on the main screen and allows quick access to the desired camera by simply
clicking on its representative icon. Clicking on a camera’s icon will display that camera in full-
screen mode.
E-map does not allow manual activation of a control. However, if a control/sensor is triggered, it
will be registered on the E-map. The icons representing the sensors/controls will be animated.
E.g. If the control that turns on the light is activated, the light icon on the E-map will flash.
57
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/