2.
Choose NC or NO depending on the type of the sensor
3.
Choose which WAV file will play when the Sensor is triggered. Type in the WAV file
name in the field provided. The WAV files are stored in the WAV folder located in the
i³DVR_Server folder.
4.
Choose Enable Alarm to have the chosen custom alarm sound every time the sensor
is triggered
OR
Choose Disable Alarm to disable the custom alarm. The internal speaker alarm will
sound instead.
5.
Set the Post Recording time between 1 and 60 s. In this example, the camera(s) will
record for 60 seconds after the Sensor is activated or after the detected motion stops.
Note
Motion and Schedule Setups must be configured.
To customize the Alarm for Sensor activation, do the following:
1.
Record the sound file in the WAV format
2.
Save the file in the WAV folder located in the i³DVR_Server folder
3.
In the Sensor Setup, type the WAV- source file name with the file extension in the Sound
File field. In the above example, the customized WAV files are chosen for Sensors 1-5.
Related Topics: Camera Setup | Control Setup | Preset Touring | Schedule Setup | Communic-
ation Setup | Server Information | System Setup | E-Map Setup | Email Setup
Hardware Setup - Control Setup
Overview
Control settings are applicable only if controls are available and are being used.
18
i³Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/