manualshive.com logo in svg

i3DVR International i3-SRX Series, Руководство пользователя

Поделиться
Скачать
i3DVR International i3-SRX Series Скачать руководство пользователя страница 86

To set up Intelli-Zone for each camera, do the following:

1.

Enable Intelli-Zone by checking the Enable Intelli-Zone checkbox.

2.

Click the desired camera number that Intelli-Zone will be configured for. The selected
camera will be displayed in the live view screen on the left.

3.

Select the Start Position's preset. This is the position the camera will return to after the
specified dwell time.

4.

Configure up to 10 desired Presets in the P/T/Z Control menu. The presets previously
configured in the P/T/Z mode can also be used

5.

Set the Active Time to enable Intelli-Zone on the selected camera. Intelli-Zone will not
work outside of the set Active Time. This value will be the same for all target areas on
one given camera.

6.

Adjust Sensitivity. This value will be the same for all target areas on one given camera.

7.

Set the Refresh time. Refreshing an image more often will decrease the cumulative
image difference caused by normal occurrences, such as changing illumination across
the period of a day and will reduce the number of false alarms. This value will be the
same for all target areas on one given camera.

Setting up Intelli-Zone target areas

To Set up Intelli-Zone target areas, do the following:

1.

Draw a target zone on the selected camera (up to 10 zones can be defined per camera):

a.

Place the cursor over the start point on the live view screen

b.

Hold the left mouse button down and drag to create a rectangular area

c.

Let the mouse button go

d.

Move/adjust the area if necessary

e.

To delete target zone, click a target zone to select it, hold the left mouse button
down and drag the target zone off from the live view window.

f.

To erase created areas, click Reset All Areas

2.

Select the specific target area by clicking on it in the live view window.

3.

Enter the Area Name for the created target zone in the Detection Zone menu.

4.

Check the Display Area Name checkbox to display the Area Name on the main screen
each time the motion is detected in that area.

5.

Select the Go to Preset position. The camera will move to this position when motion is
detected.

6.

Set the Block Count number by clicking up and down with the arrows. The Block Count
number determines the detection sensitivity of the target zone. One block is 10-pixels
high and 10-pixels wide. The higher the block count number, the more significant a
change must be in an image to set off the alarm. The Percent of Change number cannot

81

i³Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at 

http://www.renderx.com/

Содержание i3-SRX Series







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды