manualshive.com logo in svg

i3DVR International i3-SRX Series, Руководство пользователя

Поделиться
Скачать
i3DVR International i3-SRX Series Скачать руководство пользователя страница 142

18. RECEIVE

9. Close

About - Displays the i³DVR license Agreement and the version of the i³Remote
software installed on the DVMS. To close, click I Accept in the bottom of the license
agreement.

Help - Displays the help menu window. The major help topics are available.

Emergency Monitor - Displays the emergency messages: sensor activation, motion
detection, and video loss.

Health Monitor - Allows a connection to the remote Server, displaying recording status,
connected cameras status (on/video loss), and controls status (on/off).

Intelli-Upgrader - Allows for the upgrading of the i³Server software on the connected
remote sites (sites must be configured in the Connections setup; i³Remote must be
connected to them at the time of the upgrade).

K-Remote Backup Server - Handles backup processes, and gives the option of canceling
the running backup process. This application MUST be running in order to perform remote
backups.

2-Way Audio - Allows the remote user to communicate via voice with anyone
who may be at the Server side.

Minimize - Minimized i³Remote without shutting down or closing the application.

137

i³Remote

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at 

http://www.renderx.com/

Содержание i3-SRX Series







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды