HRTL-One DVR Quick Start Guide
For Front Panel Operation, see over.
Step 1: Unpack everything
Your HRTL-One comes with the following items:
•
One single channel HRTL-One Digital Video Recorder
•
One hard drive cartridge (hard drive not included) and a
key for the cartridge (located inside drive carrier)
•
One power converter and power cord
•
One rack mounting kit
•
HRTL-One Digital Video Recorder User Guide
•
External I/O connector
•
80 GB Hard Drive (included with HRTL-One-80 DVR,
not included with HRTL-One DVR)
Step 2: Remove the hard drive cartridge
Ensure HRTL-One is powered off.
HDD
HDD Full ALARM TIMER
PLAY
REC
MENU
ENTER
SEARCH
SLOW
POWER
REC
PAUSE
/ Up
REW
Left
STOP
/ Down
FF
Right
Hard drive
1.
Pull handle towards you.
2.
Insert key and
turn to B
position.
A
B
cartridge frame
New HD Carrier
Original HD Carrier
Key
Active handle
3.
Remove carrier body from cartridge frame. Set aside.
Cartridge frame
Carrier body
Original HD Carrier
New HD Carrier
4.
Remove top cover.
Release Latch
Release Latch
Original HD Carrier
New HD Carrier
Step 3: Install hard drive
5.
Ensure hard drive is configured as Master. Refer to the
documentation that came with the hard drive for the
jumper settings.
Step 4: Connect equipment
Figure 1 Single camera installation
PC power cable
IDE ribbon cable
6.
Insert cables on hard drive.
PC power cable
IDE ribbon cable
Original HD Carrier
New HD Carrier
7.
Secure the hard drive into the hard drive cartridge using
the four #6-32 screws supplied.
New HD Carrier
Original HD Carrier
8.
Replace top cover and insert the carrier
body into the HRTL-One cartridge frame.
New HD Carrier
Original HD Carrier
Cartridge frame
Carrier body
Carrier body
Top Cover
9.
Turn the key lock to the
A
position
before
powering on. This will ensure that the hard drive
functions normally.
A = ON (Locked, hard drive cannot be removed)
B = OFF (Unlocked, hard drive can be removed)
A
B
DVR
