Hardware options installation 73
o
Extend the server from the rack (on page
17
).
o
Remove the server from the rack (on page
20
).
4.
Remove the access panel (on page
21
).
5.
Remove the PCI riser cage (on page
23
).
6.
Identify the expansion slot compatible with the new option, and then remove the cover opposite that
slot.
7.
Remove the baffle from the expansion board.
IMPORTANT:
There is no need to remove the baffle when the controller card is installed in slot 1.
Slot 1 is a full-height, half-length slot, so it supports the baffle in place while slot 2 and slot 3 do
not.
8.
Install the expansion board.
o
Expansion board installation into slot 1
Содержание ProLiant DL160 Gen9
