HP ProLiant DL160 Gen9, Руководство пользователя

Страница: 43 / 139

Hardware options installation 43
9.
Install the storage controller.
10.
Connect all necessary internal cables to the storage controller. For internal drive cabling information,
see "Storage cabling (on page
88 )."
11.
Install the PCI riser cage (on page 24 ).
12.
Install the access panel (on page 22 ).
13.
Install the server into the rack (" Installing the server into the rack " on page 30 ).
14.
Connect all necessary external cables to the storage controller. For more information on these cabling
requirements, see the documentation that ships with the option.
15.
Power up the server (on page 17 ).
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
16.
Install the drives (" Drive options " on page 37 ).
For more information about the integrated storage controller and its features, select the relevant user
documentation on the HP website (
http://www.hp.com/go/smartstorage/docs ).
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
( http://www.hp.com/go/smartstorage/docs ).
Installing an FBWC module and an HP Smart Storage Battery
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website ( http://www.hp.com/go/qs ).
CAUTION: In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the external drives as failed when the server is powered up.
To install the component:
1.
Power down the server (on page 17 ).
2.
Remove all power: