HP ProLiant DL160 Gen9 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 139

HP ProLiant DL160 Gen9 Скачать руководство пользователя страница 37

Hardware options installation 37

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

To prevent damage to electrical components, properly ground the server before

beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Security bezel option

The security bezel helps prevent unauthorized physical access to the front panel components. The security
bezel is only supported in servers using the quick-release latch rack ears.
Install the security bezel and then lock it with the key provided with the kit.

Drive options

The server supports up to four LFF hot-plug or non hot-plug drives and up to eight SFF hot-plug drives.
The embedded storage controller supports SATA drive installation. For SAS drive installation, install an HP

Host Bus Adapter or an HP Smart Array Controller board option.

«
...
35
36
37
38
39
...
»

Содержание ProLiant DL160 Gen9












































































































































Отзывы:

Нет отзывов