HP ProLiant DL160 Gen9 Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 139

background image

Software and configuration utilities 110

•

Auto (default)

—If configured in Auto Mode, USB 3.0 capable devices operate at USB 2.0 speeds in the

pre-boot environment and during boot. When a USB 3.0 capable OS USB driver loads, USB 3.0

devices transition to USB 3.0 speeds. This mode provides compatibility with operating systems that do
not support USB 3.0 while still allowing USB 3.0 devices to operate at USB 3.0 speeds with state-of-the

art operating systems.

•

Enabled

—If Enabled, USB 3.0 capable devices operate at USB 3.0 speeds at all times (including the

pre-boot environment) when in UEFI Boot Mode. This mode should not be used with operating systems

that do not support USB 3.0. If operating in Legacy Boot BIOS Mode, the USB 3.0 ports cannot function

in the pre-boot environment and are not bootable.

•

Disabled

—If configured for Disabled, USB 3.0 capable devices function at USB 2.0 speeds at all times.

The pre-OS behavior of the USB ports is configurable in System Utilities, so that the user can change the
default operation of the USB ports. For more information, see the

HP UEFI System Utilities User Guide for HP

ProLiant Gen9 Servers

on the HP website (

http://www.hp.com/go/ProLiantUEFI/docs

).

External USB functionality

HP provides external USB support to enable local connection of USB devices for server administration,

configuration, and diagnostic procedures.
For additional security, external USB functionality can be disabled through USB options in UEFI System
Utilities.

Redundant ROM support

The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server has
a single ROM that acts as two separate ROM images. In the standard implementation, one side of the ROM

contains the current ROM program version, while the other side of the ROM contains a backup version.

NOTE:

The server ships with the same version programmed on each side of the ROM.

Safety and security benefits

When you flash the system ROM, the flashing mechanism writes over the backup ROM and saves the current

ROM as a backup, enabling you to switch easily to the alternate ROM version if the new ROM becomes
corrupted for any reason. This feature protects the existing ROM version, even if you experience a power

failure while flashing the ROM.

Keeping the system current

Access to HP Support Materials

Access to some updates for HP ProLiant Servers may require product entitlement when accessed through the

HP Support Center support portal. HP recommends that you have an HP Passport set up with relevant
entitlements. For more information, see the HP website

(

http://h20564.www2.hp.com/portal/site/hpsc/public/kb/docDisplay/?docId=c03859703

).

«
...
108
109
110
111
112
...
»

Содержание ProLiant DL160 Gen9












































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL160 Gen9

Cyclades-PR4000

Бренд: Cyclades Страницы: 174

Transport GT26-B4987

Бренд: TYAN Страницы: 125

Бренд: HPE Страницы: 58

xSeries 342 2RX

Бренд: IBM Страницы: 158

Бренд: Syncronorm Страницы: 17

Бренд: LOVATO ELECTRIC Страницы: 5

@server x Series

Бренд: IBM Страницы: 8

eserver xSeries 350

Бренд: IBM Страницы: 174

TalkAnytime TA410

Бренд: Multitech Страницы: 209

Бренд: Supermicro Страницы: 72

Бренд: Supermicro Страницы: 78

Бренд: Satel Страницы: 8

Serial Servers Vlinx VESR9xx

Бренд: Vlinx Страницы: 65

EtherneTV-NXG 1

Бренд: VBrick Systems Страницы: 21

Бренд: Planex Страницы: 97

Бренд: Lantronix Страницы: 76

Бренд: Inspur Страницы: 3

Бренд: Gigabyte Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды