HP ProLiant DL160 Gen9, Руководство пользователя

Страница: 32 / 139

Setup 32
d.
Position the power cord inside the clip, and then close the clip.
e.
Slide the clip forward until it is flush against the edge of the power cord plug.
For a server using a hot-plug power supply:
4.
To prevent accidental power cord disconnection when sliding the server in and out of the rack, secure
the power cord in the hook-and-loop strap attached to the power input module handle:
a.
Unwrap the hook-and-loop strap from the power input module handle.
CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a
server cable. Never bend power cords and server cables tight enough to cause a crease in the
sheathing.